Cisco C1300-24XTS 评测:24 端口 10GbE 交换机

今天我们要看的是 Cisco Catalyst C1300-24XTS。这是一款有趣的交换机,因为它提供 24 个独立的 10GbE 端口,平均分为 12 个 10Gbase-T 端口和 12 个 SFP+ 笼子。这种端口组合对于同时拥有支持 10GBase-T 的服务器或工作站以及光纤连接存储或上行链路的管理员来说很重要。我们之前已经看过许多这类交换机,包括 C1300-16XTS、C1300-12XS、C1300-12XT-2X 和 C1300-8FP-2G。24 端口型号是真正出色的那款,并且已经运行数月没有出现问题,所以终于到了评测的时候。让我们深入了解硬件。
Cisco Catalyst C1300-24XTS 硬件概览
Cisco Catalyst C1300-24XTS 是一款 1U 机架式交换机,采用金属机箱。该设备尺寸为 444.3mm x 273mm x 43.94mm,重 4.2kg。与我们评测过的许多端口数较少的型号不同,这是一台完整的 1U 设备,能够填满机架,并且比我们测试过的其他设备宽得多。
Cisco Catalyst C1300-24XTS 正面 1
前面板左侧是一组管理接口。这些包括多种访问控制台接口的方式。Cisco 让这变得非常容易。
Cisco Catalyst C1300-24XTS USB C 端口 1
十二个铜缆数据端口编号为 1 到 12,支持 10GBase-T。它们在前面板上排列为两行,每行六个。我们经常看到关于带有 SFP+ 和 10Gbase-T 的交换机的一个问题是它们是否为组合插孔,这些不是。
Cisco Catalyst C1300-24XTS 10 GbE RJ45 端口 1
紧挨着它们的是十二个 SFP+ 笼子,编号为 13 至 24,分三组排列、每组四个。它们为上行链路或存储网络提供光纤连接选项。此外,采用这种分散式布局,Cisco 让 SFP+ 光模块和 DAC 插入交换机变得更方便,散热也稍微更容易一些。
Cisco Catalyst C1300-24XTS 10 GbE SFP+ 端口 1
在前面板最右侧,有一个专用的 RJ45 接口,工作速率为 1GE。该端口在物理上与左侧的 console 接口以及 24 个数据端口都是彼此独立的。它提供带外管理访问,使管理员能够不依赖主数据平面即可访问交换机。
Cisco Catalyst C1300-24XTS 管理端口
这台设备随附了两个机架耳,它们与我们在此前 12 端口和 16 端口型号上看到的略有不同。
Cisco Catalyst C1300-24XTS 机架耳 2
在机箱两侧,我们可以看到大面积的穿孔散热孔阵列,以及螺丝和安装位。这款交换机的两侧都设有通风孔。
Cisco Catalyst C1300-24XTS 侧面 1
转到后部,可以看到一个通风口、产品标签、用于固定设备的锁点或锁槽,以及一个单独的 AC 电源输入。这里没有冗余电源输入,因此若要实现 A+B 双路供电,就需要外接一台自动转换开关 PDU。
Cisco Catalyst C1300-24XTS 后部 1
接下来,让我们打开这台交换机,看看 Cisco 在里面做了什么。
译文由英文原文机器翻译,术语按行业惯例统一,可在文末展开原文核对。
查看英文原文(Cisco Catalyst C1300-24XTS Review A Neat 24-port 10GbE Switch)
Today we are looking at the Cisco Catalyst C1300-24XTS. This is an interesting switch because it offers 24 independent 10GbE ports, split evenly between 12x 10Gbase-T ports and 12x SFP+ cages. That port mix matters for administrators who have a blend of 10GBase-T-capable servers or workstations alongside fiber-connected storage or uplinks. We have looked at a number of these switches before, including the C1300-16XTS, C1300-12XS, C1300-12XT-2X, and C1300-8FP-2G. The 24-port model is the one that is really neat, and it has been running without issue for months, so it is finally time for the review. Let us get into the hardware.
Cisco Catalyst C1300-24XTS Hardware Overview
The Cisco Catalyst C1300-24XTS is a 1U rackmount switch with a metal chassis. The unit measures 444.3mm by 273mm by 43.94mm and weighs 4.2kg. Unlike many of the lower-port-count models we have reviewed, this is a full 1U unit that fills out the rack and is much wider than the other units we have tested.
Cisco Catalyst C1300-24XTS Front 1
On the left side of the front panel is a cluster of management interfaces. These include several ways to access a console interface. Cisco makes this very easy.
Cisco Catalyst C1300-24XTS USB C Port 1
The twelve copper data ports are numbered 1 through 12 and support 10GBase-T. These are arranged in two rows of six on the front panel. A question we often see about switches with SFP+ and 10Gbase-T is whether they are combo jacks, these are not.
Cisco Catalyst C1300-24XTS 10 GbE RJ45 Ports 1
Next to those are twelve SFP+ cages numbered 13 through 24, arranged in three banks of four. These provide fiber connectivity options for uplinks or storage networks. Also by going with this spread-out solution, Cisco makes putting SFP+ optics and DACs into the switch easier, and cooling is a bit easier as well.
Cisco Catalyst C1300-24XTS 10 GbE SFP+ Ports 1
On the far right of the front panel, there is a dedicated RJ45 connector that operates at 1GE. This port is physically separate from both the left console connector and the 24 data ports. It provides out-of-band management access, allowing administrators to reach the switch independently of the main data plane.
Cisco Catalyst C1300-24XTS Management Port
Both rack ears came supplied with this unit and are a bit different than we saw on the 12 and 16-port models.
Cisco Catalyst C1300-24XTS Rack Ears 2
On the sides of the chassis, we get large perforated vent banks along with screws and mounting positions. Both sides are vented on this switch.
Cisco Catalyst C1300-24XTS Side 1
Moving to the rear, there is a vent, the product label, lock points or slots for securing the unit, and a single AC power input. There is no redundant power input here, so for A+B power delivery, you would need an external automatic transfer switching PDU.
Cisco Catalyst C1300-24XTS Rear 1
Next, let us get inside the switch to see what Cisco did there.
原文为英文,正文由自动抓取并保留原文。
原文发布于 ServeTheHome(Cisco Catalyst C1300-24XTS Review A Neat 24-port 10GbE Switch),标题、摘要与正文由机器翻译,术语按行业惯例统一,未经人工逐句校订。