11-19 更新 实时
首页/ AI 大模型/ 正文

1994款老车用 Claude AI 通过加州尾气检测

AI 大模型 来源:Tom's Hardware 2026-11-13 18:30 0 阅读 机器翻译
1994款老车用 Claude AI 通过加州尾气检测

一位 AI 爱好者借助 AI 的帮助和一点电子接线技巧,成功让自己那辆 1994 年的老 Jeep Cherokee 通过了加州尾气排放检测。这辆 32 年车龄的老车只有一个简陋的发动机电脑,但通过 Arduino Nano 板把它接到笔记本电脑上之后,许多设置都能被读取,最终还能被控制。

上面这段视频记录了 Muhammad Zulali 的整个过程:从这辆 Jeep 连续多次尾气检测不合格,到成功把它接上并读取 ECU 数据,再到调校并解决发动机排放问题。整个过程中,Claude 提供指导,Codex 负责编写所需的任何代码。

这辆相当老旧的 Jeep 之所以通不过加州尾气检测,是因为在某些测试车速下产生的 NOx 过多。它最初是在 25mph 时不合格。之后,Zulali 对氧混合比做了一些调整,结果在 25mph 和 50mph 下都不合格了。没错,情况变得更糟了。

Zulali 承认,他实际上是在盲调,而后续每一次监管部门的污染检测都要花费近 100 美元。这显然是个大问题,但在 2026 年,我们有 AI 帮忙。实际上,靠的就是 AI 加一个 3 美元的微控制器,整套物料清单总成本不超过 15 美元。

这套可能的 AI 方案面临的第一个障碍是:如何让一辆老车与一台新笔记本电脑对接。Claude 告诉这位 Jeep 车主,发动机通过 Chrysler SCI 总线通信,速率约为 7,800 波特,其电平极性与典型的串口相反。Arduino Nano 可以完成所需的电平反转,并把数据接到现代电脑上。Nano 被插在面包板上,接了几根必要的线,其中三根连到 Cherokee 的 6 针诊断插头。

第一次连接尝试成功了,但系统最初只记录了冷却液温度和电池电压。Zulali 想要更多数据点,还想加入一些控制手段,以解决尾气检测的问题。在根据其他车型的数据得出了几条误导性线索——说发动机「混合气过浓」、多消耗了 22% 的燃料——之后,这位 Jeep 车主让 Claude 从试驾中收集数据。AI 记录了以 25 mph 和 50 mph 行驶时的发动机数据和故障码,以查明到底发生了什么。它还被放开去控制燃油压力等项目。

在拿到了看起来可信的诊断结果和解决方案之后,Zulali 想用 AI 调整过的代码重新刷写汽车的主 ECU,这样就能通过加州所有的尾气检测。可惜的是,这辆车的电脑只是早了几个月,不具备可重新刷写的固件。于是,这位 Jeep 车主让 Codex 在附近的一块 EEPROM 中注入并运行自定义代码。

「Claude 完成了大部分诊断工作,Codex 几乎包办了所有内存方面的工作,」Zulali 承认道。「我只负责接线和开车。」他还补充说,这一壮举并不需要机械师的服务,也不需要 Chrysler 经销商工具。

除了视频之外,这位修复 Cherokee 排放问题的车主还为该项目创建了一个 GitHub 仓库,名为 xj-scanner。它是依据 GPLv3 许可证分发的自由软件。

译文由英文原文机器翻译,术语按行业惯例统一,可在文末展开原文核对。

查看英文原文(1994 Jeep Cherokee owner hacks 32-year-old car with Claude AI to pass California smog tests)

An AI enthusiast managed to get his old 1994 Jeep Cherokee to pass the California smog tests, all thanks to the help of AI and a little electronics wiring skill. This 32-year-old car had only a primitive engine computer, but after connecting it to a laptop via an Arduino Nano board, many settings could be read and eventually controlled.

The above video documents Muhammad Zulali’s journey from the Jeep failing consecutive smog tests, to managing to hook it up and get readings from the ECU, to tuning and fixing the engine emission issues. All the while, Claude provided guidance, and Codex wrote any required code.

This rather old Jeep was failing the California smog tests due to producing too much NOx at certain test speeds. It initially failed at 25mph. Then, after Zulali made some adjustments to the oxygen mix, it failed at both 25mph and 50mph. Yes, it got worse.

Zulali admits he was effectively making adjustments blind, and subsequent regulatory pollution tests cost nearly $100 each time. That’s clearly a big problem, but we have AI to help us in 2026. Actually, it was AI and a $3 microcontroller, contributing to a total bill of materials of no more than $15.

The first hurdle facing the possible AI solution was the question of how to interface an old car and a new laptop. Claude told the Jeep owner that the engine communicated on a Chrysler SCI bus at ~7,800 baud, which was electrically inverted compared to a typical serial port. An Arduino Nano can handle the required inversion and hook up the data to a modern computer. The Nano was breadboarded, with a few necessary wires, three of which connected to the 6-pin diagnostic plug in the Cherokee.

xj-scanner wiring diagram

(Image credit: Muhammad Zulali)

The first connection attempt was a success, but only coolant temperature and battery voltage were charted by the system to begin with. Zulali wanted more data points plus some controls to fix the smog test problem. After a couple of red herrings regarding the engine “running rich” with 22% extra fuel, based on other car model data, the Jeep owner got Claude to collect data from test drives. The AI logged engine data and fault codes during a drive at 25 mph and at 50 mph to see what was happening. It was also let loose to control things like fuel pressure.

With what looked like a credible diagnosis and solution in hand, Zulali wanted to reflash the car’s main ECU with AI-tweaked code that would mean it could pass all the California smog tests. Unfortunately, this car’s computer was just a few months too old to feature reflashable firmware. Instead, the Jeep owner got Codex to inject and run custom code inside a nearby EEPROM.

“Claude did most of the diagnostic work and Codex did pretty much all of the memory work,” admits Zulali. “I just did the wiring and the driving.” He added that he didn’t need the services of a mechanic or a Chrysler dealer tool for this feat.

In addition to the video, the Cherokee emissions fixer has created a GitHub repository for this project, dubbed xj-scanner. It is free software distributed under the GPLv3 license.

正文保留英文原文,标题与摘要由机器翻译。

本文由采集器自动同步

原文发布于 Tom's Hardware(1994 Jeep Cherokee owner hacks 32-year-old car with Claude AI to pass California smog tests),标题、摘要与正文由机器翻译,术语按行业惯例统一,未经人工逐句校订。

阅读原文 ↗