11-19 更新 实时
首页/ 算力/ 正文

AI系统可重建气动外形并预测其性能

算力 来源:TechXplore 2026-11-13 05:20 0 阅读 机器翻译
AI系统可重建气动外形并预测其性能

由 Gaby Clark 编辑,Robert Egan 审阅

本文已按照 Science X 的编辑流程与政策进行审阅。编辑在确保内容可信度的同时,重点强调了以下特征:

添加到首选来源

研究人员开发了一套名为 PI-GAE 的 AI 系统,能够以高精度预测 100 个新设计候选方案的外形与性能。此处展示的三个模型代表了网格的压缩过程。AI 的预测值与该外形对应的计算值十分接近。图片来源:Koji Shimoyama/九州大学

飞机机翼或风力涡轮机叶片的效率取决于空气如何绕其流动。要找到最优外形,需要测试大量设计方案,这一过程既繁重又耗时。如今,九州大学的研究人员开发出一套新的人工智能(AI)系统,可以预测不同外形的气动性能。该系统有望让工程师腾出更多时间,更高效地探索和比较设计方案。

在设计气动部件时,工程师会生成不同的几何外形,模拟其周围的气流,并比较它们的气动性能,以找出有潜力的外形。然而,逐一评估每个潜在设计方案都涉及大量细节特征,既耗时,计算成本也高。

将外形与气动性能关联起来

由九州大学工学部机械工程系教授 Koji Shimoyama 与里昂中央理工学院 LTDS 实验室研究员、日本学术振兴会(JSPS)研究员 Thanasak Wanglomklang 领衔的研究团队,开发出 PI-GAE(物理信息几何嵌入图自编码器),这是一种基于 AI 的系统,能够预测不同形状的气动性能,有望在设计中减少对反复进行高算力仿真的依赖。

该论文于 2026 年 10 月 28 日发表在期刊《Computer Methods in Applied Mechanics and Engineering》上。

Shimoyama 解释说:“如今,工程师需要用精细的计算机计算逐个测试大量形状。我们的方法通过估算某个形状可能具有的性能、并将每一项估算与该形状关联起来,让比较众多方案变得更容易。这有望缩短早期设计工作,并帮助找出空气阻力更小或更节能的部件。”

更小的表示,更准确的预测

气动部件通常被表示为包含数千个相互连接点的计算网格。通过调整这些点的位置来探索不同设计,可能带来很高的计算量。

PI-GAE 不逐个处理网格点,而是用数量更少的变量来描述每个形状。随后利用这些变量重建原始形状,并预测其气动性能。研究人员使用机翼和叶片的形状与性能数据训练了该 AI 系统,并在四个数据集上进行了测试,涵盖二维和三维机翼以及压气机叶片。

PI-GAE 准确预测了机翼会产生多大阻力,以及叶片压缩空气的效率有多高。其预测结果与详细计算的结果高度吻合,四项测试中的决定系数在 0.946 至 0.992 之间。

与仅能预测性能的 AI 系统不同,PI-GAE 还能重建原始形状。在四组数据集中的三组里,重建形状与原始形状的平均偏差低于 0.3%。这项能力可以同时展示形状的外观和预期的性能表现,从而帮助工程师比较不同的设计方案。这有望让机翼、发动机叶片及其他气动部件的早期设计阶段更高效。

更广泛的应用仍需进一步测试

“这项研究可以帮助工程师改进机翼、喷气发动机叶片以及其他推动空气流动的部件。例如,它可以帮助比较不同的机翼形状,找出空气阻力更小、可能降低油耗的设计。它还可以帮助改进能更有效压缩空气的发动机叶片,从而有可能提升发动机效率。在航空之外,类似的方法也可用于风扇、泵、风力发电机和空调设备,”Shimoyama 表示。

研究人员提醒说,该系统迄今只在与训练所用形状相似的机翼和叶片上做过测试。他们计划进一步开发该系统,以处理不熟悉的、更复杂的形状。这些改进有望让该技术更接近在飞机、风力发电机及其他气动部件中的实际应用。

Thanasak Wanglomklang 等,一种用于形状降维、重建与代理建模的物理信息几何嵌入图自编码器,Computer Methods in Applied Mechanics and Engineering(2027)。DOI: 10.1016/j.cma.2026.119534

这篇报道的背后是谁?

英语硕士,自 2021 年起担任文字编辑,拥有高等教育与健康内容领域经验。致力于可信赖的科学新闻。完整简介 →

数学生物学学士,创意写作硕士。游历广泛,对科学与语言有独到见解。完整简介 →

引用:AI 系统可重建气动外形并预测其性能(2026 年 11 月 12 日),2026 年 11 月 12 日检索自 https://techxplore.com/news/2026-11-ai-reconstruct-aerodynamic.html

本文件受版权保护。除为私人学习或研究目的进行的合理使用外,未经书面许可,不得复制任何部分。内容仅供参考。

深度学习工具或有助于减少空气阻力造成的排放

更高效的飞机发动机:科学家揭示优化潜力

AI 创造出性能优于人类设计的优化发动机部件

研究表明,飞机上的 AI 可降低空中失速和骤降的风险

快速、准确的阻力预测有助于改进飞机设计

AI 改进宇宙粒子扫描,在模拟中更精准地定位隐藏物体

研究人员解开一个关于辐射的物理学难题,有望催生更坚固的电子器件

早期测试中,手势与振动腰带让无人机无需视觉反馈即可受控

研究将水泥颗粒形状与建筑成本联系起来

电场可以改变半导体的散热方式

飞机仿真借助超级计算机攀上新高度

即刻获取摘要文本(Gist)

PI-GAE 从紧凑表示中重建气动外形,并预测其性能。在四个机翼和压气机叶片数据集上,预测 R² 介于 0.946 至 0.992 之间;在其中三个数据集中,平均重建偏差低于 0.3%。测试仅限于与训练数据相似的形状,因此对陌生几何形状的泛化能力尚未得到验证。

本摘要由 LLM 自动生成。完整免责声明

译文由英文原文机器翻译,术语按行业惯例统一,可在文末展开原文核对。

查看英文原文(AI system can reconstruct aerodynamic shapes and predict their performance)

edited by Gaby Clark, reviewed by Robert Egan

This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility:

Add to Preferred Sources

An AI system that reconstructs aerodynamic shapes and predicts their performance Researchers have developed an AI system called PI-GAE that can predict the shape and performance of 100 new design candidates with high accuracy. The three models shown here represent the compression of the mesh. The AI's predicted values are close to the calculated values of the shape. Credit: Koji Shimoyama/Kyushu University

The efficiency of an aircraft wing or a wind turbine blade depends on how air flows around it. Finding an optimal shape involves testing numerous designs and can be a burdensome and time-consuming process. Now, researchers at Kyushu University have developed a new artificial intelligence (AI) system that can predict the aerodynamic performance of different shapes. The AI system may allow engineers more time to explore and compare designs more efficiently.

When designing aerodynamic components, engineers generate different geometric designs, simulate airflow around them and compare their aerodynamic performance to identify promising shapes. However, evaluating each potential design individually involves numerous detailed features and can be time-consuming and computationally expensive.

Linking shape to aerodynamic performance

Researchers led by professor Koji Shimoyama of Kyushu University's Faculty of Engineering, Department of Mechanical Engineering, and Thanasak Wanglomklang, a researcher from the LTDS Laboratory at École Centrale de Lyon and a JSPS research fellow, have developed PI-GAE (physics-informed geometry-embedded graph autoencoder), an AI-based system that can predict the aerodynamic performance of different shapes, potentially reducing the need for repeated, computationally expensive simulations during the design process.

The paper was published on Oct. 28, 2026, in the journal Computer Methods in Applied Mechanics and Engineering.

"Today, engineers need to test many shapes one by one using detailed computer calculations. Our method makes it easier to compare many options by estimating how a shape may perform and linking each estimate to the shape. This could shorten early design work and help identify parts that create less air resistance or are energy efficient," explains Shimoyama.

Smaller representations, accurate predictions

Aerodynamic components are typically represented as computational meshes containing thousands of connected points. Modifying the positions of these points to explore different designs can be computationally intensive.

Instead of working with the mesh points individually, PI-GAE describes each shape using a smaller number of variables. These variables are then used to recreate the original shape and predict its aerodynamic performance. The researchers trained the AI system using data on the shapes and performance of the wings and blades. They tested it on four datasets covering two-dimensional and three-dimensional wings and compressor blades.

PI-GAE accurately predicted how much drag a wing would generate and how efficiently blades could compress air. Its predictions closely matched the results of detailed calculations, with coefficients of determination ranging from 0.946 to 0.992 across the four tests.

Unlike AI systems that only predict performance, PI-GAE can also reconstruct the original shapes. In three of the four datasets, the reconstructed shapes had an average deviation of less than 0.3% from the originals. This capability could help engineers compare different design options by showing both how a shape looks and how it is expected to perform. This may make the early stages of designing aircraft wings, engine blades and other aerodynamic components more efficient.

Broader applications need further testing

"This research could help engineers improve aircraft wings, jet-engine blades and other parts that move air. For example, it could help compare different wing shapes to find designs that create less air resistance and may reduce fuel consumption. It could also help improve engine blades that compress air more effectively, potentially making engines more efficient. Beyond aviation, similar approaches could be useful for fans, pumps, wind turbines and air-conditioning equipment," says Shimoyama.

The researchers caution that the system has so far been tested on wings and blades similar to those used for training. They plan to further develop it to handle unfamiliar and more complex shapes. These improvements could bring the technology closer to practical applications in aircraft, wind turbines and other aerodynamic components.

Thanasak Wanglomklang et al., A physics-informed geometry-embedded graph autoencoder for shape reduction, reconstruction, and surrogate modeling, Computer Methods in Applied Mechanics and Engineering (2027). DOI: 10.1016/j.cma.2026.119534

Who's behind this story?

Gaby Clark

MA in English, copy editor since 2021 with experience in higher education and health content. Dedicated to trustworthy science news. Full profile →

Bachelor's in mathematical biology, Master's in creative writing. Well-traveled with unique perspectives on science and language. Full profile →

Citation: AI system can reconstruct aerodynamic shapes and predict their performance (2026, November 12) retrieved 12 November 2026 from https://techxplore.com/news/2026-11-ai-reconstruct-aerodynamic.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Deep learning tool may help cut emissions caused by air resistance

More efficient aircraft engines: Scientists reveal optimization potential

AI creates optimized engine components that outperform human designs

AI on aircraft can reduce risk of mid-air stalls and sudden drops, study shows

Fast, accurate drag predictions could help improve aircraft design

AI improves cosmic particle scans to locate hidden objects more accurately in simulations

Researchers solve a physics puzzle about radiation that could lead to tougher electronics

Hand gestures and vibrating belt enable drone control without visual feedback in early tests

Study links cement particle shape and construction costs

Electric fields can change how semiconductors dissipate heat

Aircraft simulations scale new heights with supercomputer

Get Instant Summarized Text (Gist)

PI-GAE reconstructs aerodynamic shapes from compact representations and predicts their performance. Across four wing and compressor-blade datasets, prediction R² ranged from 0.946 to 0.992; mean reconstruction deviation was below 0.3% in three datasets. Testing was limited to shapes similar to training data, leaving generalization to unfamiliar geometries unverified.

This summary was automatically generated using LLM. Full disclaimer

This site uses cookies to assist with navigation, analyse your use of our services, collect data for ads personalisation and provide content from third parties. By using our site, you acknowledge that you have read and understand our Privacy Policy and Terms of Use.

原文为英文,正文由自动抓取并保留原文。

本文由采集器自动同步

原文发布于 TechXplore(AI system can reconstruct aerodynamic shapes and predict their performance),标题、摘要与正文由机器翻译,术语按行业惯例统一,未经人工逐句校订。

阅读原文 ↗